Join our mailing list!






You are here:Home > Downhole/Production Equipment
Choose a sub category:
Back Pressure Valve EUE 8RD Swage
EUE 8RD Bull Plugs Vent Valves
Stuffing Box Packing Stuffing Boxes
Pumping Flow Tee Pony Rods
Polish Rod Clamps Polish Rod Liners
Sucker Rod Coupings Pup Joints
EUE 8rd Tubing Nipple Casing, and Tubing Couplings
Polished Rods Seating Nipples, Strainers and Sand Screens
Sort By:
Page of 2
4-1/2" 8RD J55 LONG CASING COUPLING 5-1/2" 8RD J55 LONG CASING COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Casing coupling with 8rd thread color coded according to class Casing coupling with 8rd thread color coded according to class
7" 8RD J55 LONG CASING COUPLING 2" EUE 8RD J55 TUBING COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Casing coupling with 8rd thread color coded according to class Tubing coupling with 8rd thread color coded according to class
2-1/2" EUE 8RD J55 TUBING COUPLING 2" 8RD X 2' PERF API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Tubing coupling with 8rd thread color coded according to class Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2" 8RD X 3' PERF API J55 PUP JOINT 2" 8RD X 4' PERF API PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2" 8RD X 2' API J55 PUP JOINT 2" 8RD X 3' API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2" 8RD X 4' API J55 PUP JOINT 2" 8RD X 6' API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2" 8RD X 8' API J55 PUP JOINT 2" 8RD X 10' API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2" 8RD X 12' API J55 PUP JOINT 2-1/2" 8RD X 2' API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2-1/2 8RD X 3' API J55 PUP JOINT 2-1/2" 8RD X 4' API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2-1/2" 8RD X 6' API J55 PUP JOINT 2-1/2" 8RD X 8' API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2-1/2" 8RD X 10' API J55 PUP JOINT 2-1/2" 8RD X 12' API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
2-1/2" EUE 8RD X 3' PERF API J55 PUP JOINT 2-1/2" EUE 8RD X 4' PERF API J55 PUP JOINT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT. Short sections of API Tubing used to make up string of tubing to surface.  WB's pup joint are available upset with 8rd thread, color coded acording to class and tensile strength, and manufactured according to API Spec 5CT.
1-1/4 LAPPIN CONE PACKING SET 1-1/4" HUBER DOME PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Teflon rope packing creates an inner seal for your polished rod to ride against. This Teflon rope packing reduces heat, friction & wear allowing the rubbers to become an outer housing for the inner seal, preventing the rubber from wearing out & increasing your packing life span by� 10 X guaranteed.� A set of Dome Packing consist of three pieces of rubber packing, each of which has a split PTFE seal ring sandwiched inside. Unique bowl shape converts vertical compression forces into radial forces for a tight seal around polished rod.
1-1/4" BRASS CONVERSION KIT F/DOME PACKING SET 1-3/8" HUBER DOME PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Split bronze retainer rings required with dome packing. A set of Dome Packing consist of three pieces of rubber packing, each of which has a split PTFE seal ring sandwiched inside. Unique bowl shape converts vertical compression forces into radial forces for a tight seal around polished rod.
1-3/8" BRASS CONVERSION KIT F/DOME PACKING SET 1-1/2" HUBER DOME PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Split bronze retainer rings required with dome packing. A set of Dome Packing consist of three pieces of rubber packing, each of which has a split PTFE seal ring sandwiched inside. Unique bowl shape converts vertical compression forces into radial forces for a tight seal around polished rod.
1-1/2" BRASS CONVERSION KIT F/DOME PACKING SET 1-3/4" HUBER DOME PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Split bronze retainer rings required with dome packing. A set of Dome Packing consist of three pieces of rubber packing, each of which has a split PTFE seal ring sandwiched inside. Unique bowl shape converts vertical compression forces into radial forces for a tight seal around polished rod.
1-3/4" BRASS CONVERSION KIT F/DOME PACKING 2" EUE 8RD STD BULL PLUG W/1/4" TAP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Split bronze retainer rings required with dome packing. High-quality oil field tubular fittings for the oil field industry.
2" EUE 8RD J-55 BULL PLUG 2-3/8" EUE 8RD XH BULL PLUG
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2" EUE 8RD XH BULL PLUG TAPPED 1/2" 2-7/8" EUE STD BULL PLUG
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2-7/8" EUE 8RD XH BULL PLUG 2-7/8" EUE 8RD XH BULL PLUG TAPPED 1/2"
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2" EUE 8RD XXH BULL PLUG TAP 1/2" 1-1/4 BUNA AND CANVAS CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. The sensational performance of RFluid-Seal rod packing is now available for cone-type stuffing boxes. Lip-type sealing action and space between each ring (sealing from pressure) creates a perfect, nonbinding fluid seal, provides and holds rod lubrication, and prevents slippage. When packing is installed finger tight, rod contact is reduced by one third, greatly reducing friction and increasing rod and packing life.
1-3/8 BUNA AND CANVAS CONE PACKING 1-1/2" LUBRIKUP BUNA & CANVAS CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
The sensational performance of RFluid-Seal rod packing is now available for cone-type stuffing boxes. Lip-type sealing action and space between each ring (sealing from pressure) creates a perfect, nonbinding fluid seal, provides and holds rod lubrication, and prevents slippage. When packing is installed finger tight, rod contact is reduced by one third, greatly reducing friction and increasing rod and packing life. The sensational performance of RFluid-Seal rod packing is now available for cone-type stuffing boxes. Lip-type sealing action and space between each ring (sealing from pressure) creates a perfect, nonbinding fluid seal, provides and holds rod lubrication, and prevents slippage. When packing is installed finger tight, rod contact is reduced by one third, greatly reducing friction and increasing rod and packing life.
2-1/4 X 1-1/2 X 3 LUBRICUPS FLUID SEAL PACKING 2-1/4 X 1-1/2 X 4 LUBRIKUP FLUID SEAL PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Fluid seal rod packing incorporates the theory of lip type action (sealing from pressure), with space provided between each ring to assure a perfect, nonbinding fluid seal for lubrication of the rod. Compatable with Skinner type jack stuffing boxes. Fluid seal rod packing incorporates the theory of lip type action (sealing from pressure), with space provided between each ring to assure a perfect, nonbinding fluid seal for lubrication of the rod. Compatable with Skinner type jack stuffing boxes.
2-1/4 X 1-1/4 SBC RUBBER GRAPHITED CROWN RINGS 2-1/4 X 1-3/8 SBC RUBBER GRAPHITED CROWN RINGS
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Skinner Crown Rings From Skinner Brothers Company. Sold in 5 pound quatinty boxes. Skinner Crown Rings From Skinner Brothers Company. Sold in 5 pound quantity boxes.
2-1/4 X 1-1/2 SBC RUBBER GRAPHITED CROWN RINGS FIG 1-SB 2" 11-1/2 X 1-1/4" STUFFING BOX
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Skinner Crown Rings From Skinner Brothers Company. Sold in 5 pound quantity boxes. Original design with unique misalignment feature reduces need for precise alignment with the pumping unit.
FIG 1-SB 2" 11-1/2 X 1-1/2" STUFFING BOX FIG 1-SB 2" EUE 8RD X 1-1/4" STUFFING BOX
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Original design with unique misalignment feature reduces need for precise alignment with the pumping unit. Original design with unique misalignment feature reduces need for precise alignment with the pumping unit.
FIG 1-SB 2" EUE 8RD X 1-1/2" STUFFING BOX FIG 1-SB 2-1/2" EUE 8RD X 1-1/2" STUFFING BOX
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Original design with unique misalignment feature reduces need for precise alignment with the pumping unit. Original design with unique misalignment feature reduces need for precise alignment with the pumping unit.
FIG 1-DPSB 2 EUE 8RD X 1-1/2 STUFFING BOX FIG 1-DPSB 2-1/2 EUE 8RD X 1-1/2 STUFFING BOX
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts. Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts.
FIG 1-DPSB 2-1/2 EUE 8RD X 1-3/4 STUFFING BOX FIG 1-DPSB 3 8V X 1-1/2 STUFFING BOX
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts. Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts.
DPSB 2" 8RD X 1-1/2" STUFFING BOX W/ORG W/DOME PKG,FUSION BOLTS CONTROL DEVICE W/EXP PROOF SWITCH
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Double packed stuffing box with Standard Oil Resevoir Gland (ORG) and packed with Nitrile Dome Packing.  For use in Conjunction with Explosion Proof Control Device. Leak detection system to prevent costly stuffing box spills. Fits the Standard Oil Resevoir Gland(ORG) in conjunction with the Double packed stuffing box.  Equipt with explosion proof swith.
DPSB 2-1/2" 8RD X 1-1/2" STUFFING BOX W/ORG W/DOME PKG,FUSION BOLTS DPSB 2-1/2" 8RD X 1-3/4" STUFFING BOX W/ORG W/DOME PKG,FUSION BOLTS
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Double packed stuffing box with Standard Oil Resevoir Gland (ORG) and packed with Nitrile Dome Packing.  For use in Conjunction with Explosion Proof Control Device. Double packed stuffing box with Standard Oil Resevoir Gland (ORG) and packed with Nitrile Dome Packing.  For use in Conjunction with Explosion Proof Control Device.
1-1/4 SOFT CONE PACKING 1-3/8 SOFT CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
For normal pumping wells. Standard packing in all single pack stuffing boxes for any type polished rod or liner. For normal pumping wells. Standard packing in all single pack stuffing boxes for any type polished rod or liner.
1-1/2 SOFT CONE PACKING 1-3/4 SOFT CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
For normal pumping wells. Standard packing in all single pack stuffing boxes for any type polished rod or liner. For normal pumping wells. Standard packing in all single pack stuffing boxes for any type polished rod or liner.
1-1/2 GOLD FLAKE CONE PACKING 1-3/4 GOLD FLAKE CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Combines the longevity of Teflon with the cleaning action in brass. Used on steel polished rods, or hard-faced liners only. Combines the longevity of Teflon with the cleaning action in brass. Used on steel polished rods, or hard-faced liners only.
1-1/4 TEFLON FILLED CONE PACKING 1-3/8 TEFLON CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Longer-lasting for pumping situations such as long stroke, fast cycle, lack of lubrication. Longer-lasting for pumping situations such as long stroke, fast cycle, lack of lubrication.
1-1/2 TEFLON FILLED CONE PACKING 1-3/4 TEFLON FILLED CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Longer-lasting for pumping situations such as long stroke, fast cycle, lack of lubrication. Longer-lasting for pumping situations such as long stroke, fast cycle, lack of lubrication.
1-3/8 LAPPIN CONE PACKING 1-1/2 LAPPIN CONE PACKING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Teflon rope packing creates an inner seal for your polished rod to ride against. This Teflon rope packing reduces heat, friction & wear allowing the rubbers to become an outer housing for the inner seal, preventing the rubber from wearing out & increasing your packing life span by� 10 X guaranteed.� Teflon rope packing creates an inner seal for your polished rod to ride against. This Teflon rope packing reduces heat, friction & wear allowing the rubbers to become an outer housing for the inner seal, preventing the rubber from wearing out & increasing your packing life span by� 10 X guaranteed.�
1-3/4 LAPPIN CONE PACKING 2" 11-1/2 TOP,BTM, AND SIDE PUMPING TEE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Teflon rope packing creates an inner seal for your polished rod to ride against. This Teflon rope packing reduces heat, friction & wear allowing the rubbers to become an outer housing for the inner seal, preventing the rubber from wearing out & increasing your packing life span by� 10 X guaranteed.� Best quality pumping flow tee. Pumping Flow Tee have 1" NPT minor side outlets for bleeder ports.
2-1/2 EUE 8RD T&B X 2 11-1/2 S CT-11 TEE 2 EUE 8RD T&B X 2 11-1/2 S CT-7 TEE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Best quality pumping flow tee. Pumping Flow Tee have 1" NPT minor side outlets for bleeder ports. Best quality pumping flow tee. Pumping Flow Tee have 1" NPT minor side outlets for bleeder ports.
2 EUE 8RD TOP X 2 11-1/2V B&S CT-7 TEE 2-1/2" EUE 8RD X 2" EUE 8RD STD TUBING SWAGE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Best quality pumping flow tee. Pumping Flow Tee have 1" NPT minor side outlets for bleeder ports. 3000 psi working pressure. High-quality oil field tubular fittings for the oil field industry.
2-1/2" EUE 8RD X 2" EUE 8RD STD N-80 TUBING SWAG 2-1/2" EUE 8RD X 2" 11-1/2 J-55 TUBING SWAGE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2-1/2" EUE 8RD X 2" EUE 8RD XH SWAGE NIPPLE 2-1/2" EUE 8RD X 2" 11-1/2 XH SWAGE NIPPLE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2-1/2" EUE 8RD X 2" 11-1/2 XXH SWAGE NIPPLE 2" EUE 8RD X 2" EUE 8RD X 4" TUBING NIPPLE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2" EUE 8RD X 2" EUE 8RD X 6" TUBING NIPPLE 2" EUE 8RD X 2" EUE 8RD X 8" TUBING NIPPLE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2" EUE 8RD X 2" EUE 8RD X 12" TUBING NIPPLE 2-1/2 EUE 8RD X 2-1/2 EUE 8RD X 4" TUBING NIPPLE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2-1/2" EUE 8RD X 2-1/2" EUE 8RD X 6" TUBING NIPP 2-1/2" EUE 8RD X 2-1/2" EUE 8RD X 12" TUBING NIP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
2-1/2" EUE 8RD X 2-1/2" EUE 8RD X 8" TUBING NIPP 1-1/4" FIG 1 PR CLAMP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. Highest clamping capacity at any bolt torque. Figure 1 rated load 13,000 lbs., maximum test load 32,000 lbs.
1-1/4" ROD BOSS CLAMP 1-1/4" X 1-1/2" X 4' HARD FACE TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Rod Boss rated load 40,000 lbs., maximum test load 55,000 lbs. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/4" X 1-1/2" X 5' HARD FACE TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 6' HARD FACE TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/4" X 1-1/2" X 7' HARD FACE TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 8' HARD FACE TYPE B POLISHED RODLINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/4" X 1-1/2" X 9' HARD FACE TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 10' HARD FACE TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/4" X 1-1/2" X 12' HARD FACE TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 14' HARD FACE TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/4" X 1-1/2" X 16' HARD FACE TYPE B POLISHED ROD LINER 1-1/2" X 1-3/4" X 10' HARD FACE TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/2" X 1-3/4" X 12' HARD FACE TYPE B POLISHED ROD LINER 1-1/2" X 1-3/4" X 14' HARD FACE TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/4" X 1-1/2" X 5' BRASS TYPE B POLISHED ROD LINER 1-1/2" X 1-3/4" X 16' HARD FACE TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem. Hasco-Loy Hard Faced Polished Rod Liners are the result of a unique application of the newest metals and plastics combined to produce a liner with the hardness to resist abrasion and coated inside with pure Epoxy Resin to protect against corrosion.� These liners are polished to a smooth finish to reduce the friction of the liner in the stuffing box packing, and are recommended to be used when abrasion, or corrosion is a problem.
1-1/4" X 1-1/2" X 4' BRASS TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 6' BRASS TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem. Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem.
1-1/4" X 1-1/2" X 7' BRASS TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 8' BRASS TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem. Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem.
1-1/4" X 1-1/2" X 9' BRASS TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 10' BRASS TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem. Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem.
1-1/4" X 1-1/2" X 14' BRASS TYPE B POLISHED ROD LINER 1-1/4" X 1-1/2" X 16' BRASS TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem. Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem.
1-1/2" X 1-3/4" X 14' BRASS TYPE B POLISHED ROD LINER 1-1/2" X 1-3/4" X 16' BRASS TYPE B POLISHED ROD LINER
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem. Hasco Bronze Alloy Polished Rod Liners are made from a special bronze alloy that is more resistant to corrosion and is harder than regular commercial brass.� Also, the inside diameter is held to a closer tolerance than commercial brass.� These liners are recommended to be used when corrosion, alignment or electrolysis is a problem.
1-1/4 X 11' PS POLISHED ROD W/5/8 PIN 2" EUE 8RD X 2" EUE 8RD X 6" STD N80 TUBING NIPP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. High-quality oil field tubular fittings for the oil field industry.
2" EUE 8RD X 2" EUE 8RD X 8" N80 TUBING NIPPLE 2" EUE 8RD X 2" EUE 8RD X 12" N80 TUBING NIPPLE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
High-quality oil field tubular fittings for the oil field industry. High-quality oil field tubular fittings for the oil field industry.
1-1/2" FIG 1 PR CLAMP 1-1/4" FIG 2 PR CLAMP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Highest clamping capacity at any bolt torque. Figure 1 rated load 13,000 lbs., maximum test load 32,000 lbs. Highest clamping capacity at any bolt torque. Figure 2 rated load 26,000 lbs., maximum test load 64,000 lbs.
1-1/2" FIG 2 PR CLAMP 1-1/4" FIG 3 PR CLAMP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Highest clamping capacity at any bolt torque. Figure 2 rated load 26,000 lbs., maximum test load 64,000 lbs. Highest clamping capacity at any bolt torque. Figure 3 rated load 40,000 lbs., maximum test load 76,000 lbs.
1-1/2" FIG 3 PR CLAMP 1-1/4 ONE-BOLT ROD BOSS JR PR CLAMP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Highest clamping capacity at any bolt torque. Figure 3 rated load 40,000 lbs., maximum test load 76,000 lbs. Rod Boss Jr. rated load 25,000 lbs., maximum test load 35,000 lbs.
1-1/2" ROD BOSS JR CLAMP 1-1/2" PRC-40 ROD BOSS CLAMP
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Rod Boss Jr. rated load 25,000 lbs., maximum test load 35,000 lbs. Rod Boss rated load 40,000 lbs., maximum test load 55,000 lbs.
1-1/4 X 11' PS POLISHED ROD W/3/4 PIN 1-1/4 X 16' PS POLISHED ROD W/5/8 PIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem.
1-1/4 X 16' PS POLISHED ROD W/3/4 PIN 1-1/4 X 22' PS POLISHED ROD W/5/8 PIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem.
1-1/4 X 16' PS POLISHED ROD W/7/8 PIN 1-1/4 X 22' PS POLISHED ROD W/3/4 PIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem.
1-1/4 X 22' PS POLISHED ROD W/7/8 PIN 1-1/4 X 26' PS POLISHED ROD W/3/4 PIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem.
1-1/4 X 26' PS POLISHED ROD W/7/8 PIN 1-1/2 X 22' PS POLISHED ROD W/7/8 PIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem.
1-1/2" X 22' PISTON STEEL POLISHED ROD W/1" PIN 1-1/2 X 26' PS POLISHED ROD W/7/8 PIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem.
1-1/2 X 26' PS POLISHED ROD W/1" PIN 5/8" X 2' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Piston Steel is manufactured from a special quality medium carbon steel (1045) and designed for light to heavy loads where well fluids are non-corrosive. This polished rod has a minimum tensile strength of 100,000 PSI and is the best choice for heavy pumping applications where corrosion is not a problem. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
5/8" X 4' TYPE D PONY ROD 5/8" X 6' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
5/8" X 8' TYPE D PONY ROD 3/4" X 2' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
3/4" X 4' TYPE D PONY ROD 3/4" X 6' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
3/4" X 8' TYPE D PONY ROD 3/4" X 2' T66 PONY RODS
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
3/4" X 4' T66 PONY ROD 3/4" X 6' T66 PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
3/4" X 8' T66 PONY ROD 7/8" X 2' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
7/8" X 4' TYPE D PONY ROD 7/8" X 6' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
7/8" X 8' TYPE D PONY ROD 7/8" X 2' T66 PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
7/8" X 4' T66 PONY ROD 7/8" X 6' T66 PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
7/8" X 8' T66 PONY ROD 1" X 2' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
1" X 4' TYPE D PONY ROD 1" X 6' TYPE D PONY ROD
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
1" X 8' TYPE D PONY ROD 1" X 2' TYPE T66 PONY ROD W/SHT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
1" X 4' TYPE T66 PONY ROD W/SHT 1" X 6' TYPE T66 PONY ROD W/SHT
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods.
1" X 8' TYPE T66 PONY ROD W/SHT 820-SO 2" INLINE VENT VALVE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Short section of sucker rod usually placed below the polished rod and used to make a rod string of a desired length. Pony rods are manufactured to the same chemical properties, rod diameters, dimensions, and tolerances as sucker rods. All high tensile strength aluminum body, lid and flange. Full opening lid and large body cavity for easy clean-out and maintenance. Clip-in pressure seat for easy replacement in shop or field even easier vacuum seat replacement.
3" INLINE VENT VALVE JAYCO JV-301 920-SO 2" STACK VENT VALVE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
All high tensile strength aluminum body, lid and flange. Full opening lid and large body cavity for easy clean-out and maintenance. Clip-in pressure seat for easy replacement in shop or field even easier vacuum seat replacement. All high tensile strength aluminum body, lid and flange. Full opening lid and large body cavity for easy clean-out and maintenance. Clip-in pressure seat for easy replacement in shop or field even easier vacuum seat replacement.
930-SO 3" STACK VENT VALVE API MOD 10# THRD COMPOUND
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
All high tensile strength aluminum body, lid and flange. Full opening lid and large body cavity for easy clean-out and maintenance. Clip-in pressure seat for easy replacement in shop or field even easier vacuum seat replacement. From the most trusted name in Oilfield thread compounds.
2" 7702-10-1500 BACK PRESSURE VALVE 2" 7702-10-900 BACK PRESSURE VALVE
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Back-pressure regulators control inlet pressure by balancing an adjustable spring force against the force of the inlet pressure. The spring force is adjusted by turning the stem/handle, which sets the desired inlet pressure. When the force rises above the force of the spring, the regulator opens until the spring force and inlet pressure are balanced again. Back-pressure regulators control inlet pressure by balancing an adjustable spring force against the force of the inlet pressure. The spring force is adjusted by turning the stem/handle, which sets the desired inlet pressure. When the force rises above the force of the spring, the regulator opens until the spring force and inlet pressure are balanced again.
50# API MODIFIED THREAD COMPOUND 2" EUE 8RD N80 TUBING COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
From the most trusted name in Oilfield thread compounds. Tubing coupling with 8rd thread color coded according to class
2-1/2" EUE 8RD N80 TUBING COUPLING 5/8" FULL SIZE CLASS T SUCKER ROD COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Tubing coupling with 8rd thread color coded according to class Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
3/4" FULL SIZE CLASS T SUCKER ROD COUPLING 3/4" SLIM HOLE CLASS T SUCKER ROD COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem. Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
7/8" FULL SIZE CLASS T SUCKER ROD COUPLING 7/8" SLIM HOLE CLASS T SUCKER ROD COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem. Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
5/8" SLIM HOLE CLASS T SUCKER ROD COUPLING 1" FULL SIZE CLASS T SUCKER ROD COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem. Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
1" SLIM HOLE CLASS T SUCKER ROD COUPLING 3/4" X 5/8" SLIM HOLE CLASS T SUCKER ROD COUPLIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem. Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
7/8" X 3/4" FULL SIZE CLASS T SUCKER ROD COUPLIN 7/8" X 5/8" SLIM HOLE CLASS T SUCKER ROD COUPLIN
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem. Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
7/8" X 3/4" SLIM HOLE CLASS T SUCKER ROD COUPLIN 1" X 3/4" SLIM HOLE CLASS T COMB ROD COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem. Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
1" X 7/8" FULL SIZE CLASS T SUCKER ROD COUPLING 1" X 7/8" SLIM HOLE CLASS T SUCKER ROD COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem. Type T sucker rod coupling dimensions and tolerances conform to API Spec11B. Type T couplings are recommended for installations where abrasion or corrosion/abrasion are not a problem.
5/8" FULL SIZE SPRAY METAL SUCKER ROD COUPLING 5/8" SLIM HOLE SPRAY METAL SUCKER ROD COUPLING
Please visit the "CONTACT" page to find the store location nearest to you.
Please visit the "CONTACT" page to find the store location nearest to you.
Spraymetal sucker rod couplings are manufactured with a .010"/.015" (.254 mm/.381 mm) thick nickel-chromium coating on the O.D., and are recommended for abrasion and corrosion resistance. Spraymetal sucker rod couplings are manufactured with a .010"/.015" (.254 mm/.381 mm) thick nickel-chromium coating on the O.D., and are recommended for abrasion and corrosion resistance.