You are here:Home > Downhole/Production Equipment > Stuffing Boxes > Stuffing Box
Sort By:
Page of 1
1-1/4 LAPPIN  CONE PACKING FIG 7 2" 11-1/2 X 1-1/4 JACK BOX FIG 7 2 11-1/2V X 1-1/2 SBC JACK BOX
Teflon rope packing creates an inner seal for your polished rod to ride against. This Teflon rope packing reduces heat, friction & wear allowing the rubbers to become an outer housing for the inner seal, preventing the rubber from wearing out & increasing your packing life span by� 10 X guaranteed.� Designed for use on any size polish rod up to 1-3/4". Changing to a different size polish rod is easily achieved by simply changing the upper and lower split bronze bushings and packing. Designed for use on any size polish rod up to 1-3/4". Changing to a different size polish rod is easily achieved by simply changing the upper and lower split bronze bushings and packing.
FIG 7 2 EUE 8RD X 1-1/4  SBC JACK BOX FIG 7 2 EUE 8RD X 1-1/2 SBC JACK BOX FIG 7 2-7/8" 8RD X 1-1/2 JACK BOX
Designed for use on any size polish rod up to 1-3/4". Changing to a different size polish rod is easily achieved by simply changing the upper and lower split bronze bushings and packing. Designed for use on any size polish rod up to 1-3/4". Changing to a different size polish rod is easily achieved by simply changing the upper and lower split bronze bushings and packing. Designed for use on any size polish rod up to 1-3/4". Changing to a different size polish rod is easily achieved by simply changing the upper and lower split bronze bushings and packing.
FIG 1-SB 2" 11-1/2 X 1-1/4" STUFFING BOX FIG 1-SB 2" 11-1/2 X 1-1/2" STUFFING BOX FIG 1-SB 2" EUE 8RD X 1-1/4" STUFFING BOX
Original design with unique misalignment feature reduces need for precise alignment with the pumping unit. Original design with unique misalignment feature reduces need for precise alignment with the pumping unit. Original design with unique misalignment feature reduces need for precise alignment with the pumping unit.
FIG 1-SB 2" EUE 8RD X 1-1/2" STUFFING BOX FIG 1-SB 2-1/2" EUE 8RD X 1-1/2" STUFFING BOX FIG 1-DPSB 2 EUE 8RD X 1-1/2 STUFFING BOX
Original design with unique misalignment feature reduces need for precise alignment with the pumping unit. Original design with unique misalignment feature reduces need for precise alignment with the pumping unit. Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts.
FIG 1-DPSB 2-1/2 EUE 8RD X 1-1/2 STUFFING BOX FIG 1-DPSB 2-1/2 EUE 8RD X 1-3/4 STUFFING BOX FIG 1-DPSB 3 8V X 1-1/2 STUFFING BOX
Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts. Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts. Most widely used stuffing box in the industry. Primary packing can be changed under pressure by tightening compression bolts.
DPSB 2" 8RD X 1-1/2" STUFFING BOX W/ORG W/DOME PKG,FUSION BOLTS CONTROL DEVICE W/EXP PROOF SWITCH DPSB 2-1/2" 8RD X 1-1/2" STUFFING BOX W/ORG W/DOME PKG,FUSION BOLTS
Double packed stuffing box with Standard Oil Resevoir Gland (ORG) and packed with Nitrile Dome Packing.  For use in Conjunction with Explosion Proof Control Device. Leak detection system to prevent costly stuffing box spills. Fits the Standard Oil Resevoir Gland(ORG) in conjunction with the Double packed stuffing box.  Equipt with explosion proof swith. Double packed stuffing box with Standard Oil Resevoir Gland (ORG) and packed with Nitrile Dome Packing.  For use in Conjunction with Explosion Proof Control Device.
DPSB 2-1/2" 8RD X 1-3/4" STUFFING BOX W/ORG W/DOME PKG,FUSION BOLTS
Double packed stuffing box with Standard Oil Resevoir Gland (ORG) and packed with Nitrile Dome Packing.  For use in Conjunction with Explosion Proof Control Device.